Here we will explain, step by step, just how easy, quick and clean wallpapering can be.
1. Wallpaper installation for blown vinyl and vinyl wallpapers backed with paper and embossed wallpapers
2. Decorating using non-woven wallpapers
For optimum results, please consider the following points before starting work:
Check the product and production codes as well as pattern information. Please keep the control sheet and paper samples.
Surface preparation can be extremely time consuming, especially in old buildings. Nevertheless, it is worth taking every trouble at this stage in order to achieve the best results. The following points should be observed:
For wallpapers with extremely smooth surfaces, it is often advisable to use a lining paper. As a general rule, the surface must be dry, stable, evenly absorbent, clean, plain and smooth.
Cutting strips of wallpaper: The room height plus an extra 5 to 10 cm for trimming should give the correct strip length for papers with seamless patterns; in this case, lengths can be cut consecutively, independent of the pattern.
Pattern repeats: Lengths are identical for wallpapers with straight pattern repeats. Simply lay the wallpaper lengths on top of one another, making sure the pattern is in the same place for each, and cut to the required length. For wallpapers with an offset pattern, every second length will be displaced by the offset stated on the insert.
Paste: Use a branded product (wallpaper adhesive) and follow the instructions specified. Mix the paste according to the manufacturer’s instructions.
For heavy vinyl wallpapers, 20% dispersion adhesive should be added to increase adhesive strength.
Paste: Use a branded product (wallpaper adhesive) and follow the instructions specified. Mix the paste according to the manufacturer’s instructions.
For heavy vinyl wallpapers, 20% dispersion adhesive should be added to increase adhesive strength.
Wallpaper hanging: Wallpaper is always hung “with the light.” In other words, work should be started at the window.
Ensure that the first length is vertically plumb so that subsequent lengths are also hung straight. Place the length on the wall, allowing an overhang at the ceiling to be able to compensate for any height differences.
Hang the subsequent strips, ensuring a good butt joint, and smooth into position working from the centre to the edges to remove air bubbles.
A sponge roller, paperhanging brush or cloth can be used for blown vinyl and vinyl wallpapers.
Use a paperhanging brush or cloth for embossed papers.
A seam roller may be used to work joint areas in blown vinyl and vinyl wallpapers. Do not use a seam roller on embossed wallpapers
.
The length can now be trimmed at the top and bottom.
Please always follow the instructions specified on the back of the label for your new Paperwalls wallpaper. Check the goods before starting work and only use wallpaper rolls with the same production code
Before starting work please consider the following points:
Check the product and production codes as well as pattern information. Please keep the control sheet and paper samples.
Surface preparation: The surface must be dry, stable, evenly absorbent, clean, plain and smooth. Old wallcoverings and soluble paints must be removed.
Cracks and holes should be filled if necessary, and particularly absorbent surfaces should be pre-coated with wallpaper paste.
Prime old, sandy plaster with a water-based primer if possible. Important: Non-woven wallpapers should be hung on surfaces of uniform colour. We therefore recommend using a tinted primer
You should ideally use a branded paste for non-woven wallpaper and follow the instructions specified.
Mix the paste according to the manufacturer’s instructions.
Then paste the wall in lengths using a roller.
Wallpaper is always hung “with the light,” so work should be started at the window. Ensure that the first length is vertically plumb so that subsequent lengths are also hung straight.
Non-woven wallpaper can be hung directly onto the pasted wall and unrolled without soaking. Smooth the lengths onto the wall using a paperhanging brush or cloth, or a sponge roller to remove bubbles.
Wallpaper is always hung “with the light,” so work should be started at the window. Ensure that the first length is vertically plumb so that subsequent lengths are also hung straight.
Non-woven wallpaper can be hung directly onto the pasted wall and unrolled without soaking. Smooth the lengths onto the wall using a paperhanging brush or cloth, or a sponge roller to remove bubbles.
A further advantage of non-woven wallpapers is that if they are hung properly in the first instance, when you next come to change your wallpaper they can be stripped without the need for soaking and without leaving any residue.
Lengths of non-woven wallpaper can also be cut before hanging. Pay close attention to the pattern repeat or pattern offset. The room height plus an extra 5 to 10 cm for trimming should give the correct strip length for papers with seamless patterns; in this case, lengths can be cut consecutively, independent of the pattern. Lengths are identical for wallpapers with straight pattern repeats. Simply lay the wallpaper lengths on top of one another, making sure the pattern is in the same place for each, and cut to the required length. For wallpapers with an offset pattern, every second length will be displaced by the offset stated on the label.
A wallpapering / pasting machine can also be used for wallpaper lengths when working with non-woven wallpapers.
Remove spots of paste immediately by dabbing them with a clean cloth.
Please feel free to reach out if you have any questions.
M&P Wallpaper Wholesaler is your go-to destination for all of your wallpaper installation Melbourne needs. Our experienced professionals have extensive experience with installing wallpaper of all shapes, sizes, and styles. Whether you need help with installation for a single room or an entire house, our team is here to help you get the perfect wallpaper look for your space. Our team of experts specialize in wallpaper installation, providing professional and high-quality services to all of our customers. We use only the best materials and techniques for installation, ensuring that your wallpaper will look perfect for years to come. Our team is also well-trained and experienced with all types of wallpaper, so you can rest assured that your installation will be done right the first time.
At M&P Wallpaper Wholesaler, we strive to provide our customers with the best value for their money. We offer competitive prices and discounts, so that you can find the perfect wallpaper for your space without breaking the bank. Our team is also dedicated to providing exceptional customer service, so you can always count on us to provide you with a smooth and hassle-free installation experience. We offer a wide variety of wallpaper styles and designs to choose from. Whether you’re looking for a modern or traditional look, we have something for every taste and budget. Our expansive selection includes everything from subtle textured wallpapers to bold geometric prints, so you can find the perfect wallpaper for your space.
